Sonoff 4CH User Guide

Hi, welcome to use Sonoff 4CH! Sonoff 4CH is a 4 channel (4-way) din rail mounting WiFi switch that can independently control the 4 home appliances. Power supply: 90-250v AC(50/60Hz), 10A.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Wiring instruction

There are two kinds of wiring: one for connecting 4 lights, one for connecting with 4 home appliances.

sonoff_4ch_details_13 sonoff_4ch_details_12

3. Add device

1. Power up your device.

sonoff_4ch_pairing

2. Press the first button for 7 seconds until the green LED blinks repeatedly.

add_device

3. For Android, please select the 1st icon, click next.

For iOS, please go to  Phone Setting>WiFi>connect the WiFi begins with ITEAD-******, enter default password 12345678. Go back to eWeLink, select the 2nd icon if your version is 2.4.0 or higher, select the 1st icon if your version is lower than 2.4.0. Click next.

The App will auto-search the device.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, the device will be registered by eWelink and add it to your account,it takes 1-3 minutes.

6. Name the device to complete.

7. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

3. APP features

1.WiFi one-to-one remote control 4 devices.

Turn on/off by tapping on device icon. Device state and real-time temperature and humidity values will simultaneously display on the interface.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Security mechanism

One device one owner. Other people can not add the devices that have already been added.

5. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

4. Problems and solutions

Read the detailed FAQ on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

Sonoff Hum

Hi, welcome to use Sonoff Hum warm mist humidifier! The device supports remotely turn on/off and adjust 3 humidity levels. Power Supply: 100-240V AC. Power: 25W.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

Register an account if you haven’t got any, and sign in.

2. Fill in Water

2.1 Please fill the tank with water. Do NOT use hot water.

Note: to avoid possible white dust due to hard water, it is recommended to use distilled or filtered water. Do not fill the water all the way to the humidifier rim. 

2.2 Plug to power up the Sonoff Hum. Turn the control knob to ON, the LED beside will light up red. If the mist starts to emit in a few seconds, please follow below steps to add it to the APP EweLink.

3. Add device

3.1 Enable your mobile WiFi and connect to your home WiFi. Your WiFi must work normally.

3.2 Open EweLink, tap “+” icon.

hum5

3.3 Remember to turn on your Sonoff Hum. The led will light up red.

hum

3.4 Then quickly turn OFF and turn ON for 3 times. (OFF –>ON for 3 times) The led will light up green and start to blink.

hum2

3.5 It’s a 2nd generation device.

For Android, please select the 1st icon, click next.

For iOS, you will see two pairing method icons to select, if your app version is 2.4.0 or higher, please select the 1st icon, if your app version is lower than 2.4.0, please select the 2nd icon, then click next.

3.6 Input your home SSID & password:

Notes:

1. If no password, keep it blank.

2. Now eWeLink only support 2.4G wifi communication protocol, 5G-WiFi-router is not supported

3.7 Next, the device will be registered by eWelink and add it to your account,it takes 1-3 minutes.

souse

3.8 Name the device to complete the adding process.

3.9 Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

4. APP features

sonoff-hum_interface

4.1. Remote ON/OFF

Turn on/off by tapping on device icon. Device state will simultaneously display on the interface.

4.2. Adjust humidity level

Click the 1/2/3 to adjust the humidity level. 1 is mild, 2 is medium, 3 is strong.

4.3. Display water level: normal and shortage. When it displays shortage, you’ll need to refill water, or the device will auto-off.

4.4. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

4.5.Timing

定时

Support max 8 single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4.6. Security mechanism

One device one owner. Other people can not add the devices that have already been added.

4.7. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

5. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum.

1. My device has added successfully, but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router WLAN, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close WLANof your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently eWeLink does not support LAN or directly connect to deceive hotspot. All devices must be connected to the router, thus they can communicate with the Internet cloud server.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

智能加湿器

您好,欢迎使用Sonoff Hum智能加湿器!

一、下载“易微联”手机APP

请直接扫描二维码下载,或者

1. 安卓手机在各大应用市场或者百度搜索“易微联”下载APP。

2. 苹果手机在app store搜索 “eWeLink” 安装APP。

 

二、APP添加设备流程

请先给加湿器注水(注入水温必须小于40℃),手动打开加湿器能正常起雾后再操作以下步骤!!!

 

 

hum4

1. ↑手机开启Wlan,并连接到您家里的WiFi,WiFi需要能正常上网。

hum5

2.↑注册并登陆易微联APP,在APP界面点击“+”图标。

hum

3. ↑在加湿器正常工作状态下(红灯长亮),快速左右旋转【关→ 开】三次。

hum2

4.↑看到加湿器绿色指示灯快闪三下,常亮,再闪三下,常亮…..如此循环。说明加湿器已成功进入配对状态。(如果失败,请断电从第3步重新操作)

hum3

5. 回到APP。

安卓用户,请选第一个图标。点击下一步。

苹果用户,V2.4.0及以上版本,请选第一个图标。V2.4.0以下版本,请选第二个图标。点击下一步。

hum6

6. ↑输入您的WiFi密码,确认输入无误,注意,暂时只支持4G WiFi, 5G不支持。点击下一步。

 

hum7

7. ↑APP开始自动搜索并添加设备,请耐心等待,完成后会自动跳到下一步。

hum8

8.↑给设备重新命名。完成添加。

9. 此时设备如果显示不在线,请稍等三~五分钟,设备正在尝试通过您的无线路由器连接到云平台。当绿色指示灯变成长亮时,说明设备成功上线,可以远程操控了。如果手机端长时间显示离线,请参照下面的(四)常见问题解决方法。

三、APP功能和特性

1. 远程开关功能和开关状态同步反馈

在APP设备列表界面,单次点击APP操作图标即可实现相关操作。如果手动开关加湿器,app也会实时显示设备当前运行状态。

hu98

2.↑点击设备右下角的箭头图标,可进入更丰富的操作界面:

分享

3. 主账号分享设备给他人功能

主账户(第一个添加了该设备的账户)可把加湿器分享给好友,实现多人共同控制。被分享账号必须是已注册的易微联账号,被分享时请保持登录在线状态。分享的同时可以勾选定时器权限(新增、修改、删除、启用)。

定时

4. 多种定时模式及断网执行功能

加湿器支持多达8组定时开关,有单次、重复以及延时快速定时等模式。加湿器可以在断网情况下依旧执行设置好的定时开关,但需要保持加湿器不断电。

5. 场景

您可以设置普通场景或者智能场景。普通场景让您一键全开或者一键全关场景内的设备。智能场景利用其他温湿度设备作为触发条件,当条件满足时,设备会被联动触发开动或者关闭。

请到设备列表,点击右上角的场景,添加场景名称、执行条件(点击执行/联动条件设备)、执行打开或者关闭。要执行普通场景时,请点击“执行”。

6. 设备安全机制

设备只能被添加在一个账户下(主账户),其他账户无法添加该设备,需要主账户删除该设备或分享。

7. APP语言(中英文)切换

APP会自动识别用户手机系统语言并显示对应的语言版本。您也可以在用户中心手动切换中英文版本。

四、常见问题和解决方法

加湿器故障原因及处理办法:

qq%e5%9b%be%e7%89%8720161212102503

1. 添加成功后,APP为什么显示离线,无法控制?

答:加湿器刚添加成功后,需要三~五分钟时间连接您的路由器并联网。如果长时间还是显示不在线,请根据加湿器的绿色指示灯(加湿器打到OFF)的状态来判断:

① 绿色指示灯每隔2秒闪一下,说明加湿器没有成功连接到您的路由器,可能是您的WiFi密码错误或者加湿器离您的路由器太远,信号太弱,也有可能环境有干扰。请先将加湿器靠近路由器,若仍显示离线,请再三确认您输入的wifi密码正确,若是密码错误,请重新添加一次;另外加湿器不能识别5G路由器,请使用2.4G的wifi无线路由器。还有请确认您的路由器后台没有使用MAC地址过滤。最后如果以上都不能解决,可以尝试使用一部手机的流量作为WiFi热点,再添加一次。

② 绿色指示灯亮1秒灭1秒,说明加湿器已经连接到了路由器和云平台,但是没有被正确添加到用户账户下,请拔掉加湿器插头再插上,稍等3分钟,如果情况依旧,请删除设备重新添加;

③ wifi指示灯每隔2秒闪两下,说明设备已连接到了路由器但没有连接到云平台,请确认您的路由器能正常上网。

2. APP搜索添加设备提示超时,多次尝试都无法添加成功,怎么办?

答:可能是频繁添加造成手机缓存没有足够的时间刷新。请先关闭手机wlan功能,过一会再开启手机wlan功能,最好同时给加湿器断电重启,再尝试添加。

3. 加湿器可以在局域网控制吗?

答:该产品安卓用户支持局域网控制,需要使用最新的固件。请保持wifi连接,当无法连接到Internet时候,设备会自动切换到局域网控制。

4. 加湿器绿色指示灯不亮了?上电没反应?加湿器不工作?

答:可能是电路损坏,请寄回给我们检测。如果是用户自行拆卸(撕毁保修标签),导致人为损坏,需自行承担来回运费并支付一定的维修费。如果是用户擅自修改固件,导致设备固件丢失,一经检测发现,我们不提供任何售后服务,用户需自行承担所有损失和费用。

如果以上无法解决您的问题,请在APP上提交一个反馈。如有任何质量问题,请联系卖家,感谢您对Sonoff的支持!

Sonoff SC User Guide

Hi, welcome to use Sonoff SC! Sonoff SC detects current temperature, humidity, light intensity, air quality (particulate)  and sound levels (noise pollution), and directly send real-time data to iOS/Android APP EWeLink. It supports micro USB 5V power supply.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Power up

Sonoff SC supports 5V USB power input. Simply plug the micro USB inside the USB port.

3. Add device

sonoff_sc_pairing

1. Enter WiFi pairing state: Press the black button for 7 seconds until the LED blinks 3 times and on repeatedly.

add_device

2. For Android, please select the 1st icon, click next.

For iOS, you will see two pairing method icons to select, if your app version is 2.4.0 or higher, please select the 1st icon, if your app version is lower than 2.4.0, please select the 2nd icon, then click next.

The App will auto-search the device.

3. Input your home SSID & password:

3.1 If no password, keep it blank.

3.2 Now eWeLink only supports 2.4G wifi communication protocol, 5G-WiFi-router is not supported

souse

4. Next, the device will be registered by eWelink and add it to your account,it takes 1-3 minutes. Once it is being added, the light will keep on.

5. Name the device to complete.

6.Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

4. APP features

4.1 Display the real-time temperature, humidity, light intensity, air quality (particulate)  and sound levels.

screenshot_2016-11-24-14-50-45-690_com-coolkit

  • Real-time temperature(0-100℃) and humidity(%)
  • Light level: dusky, normal, bright
  • Air quality: bad, moderate, unhealthy
  • Sound level: quiet, normal, noisy

4.2 Smart Scene

Sonoff SC supports to set up all kinds of smart scenes to trigger on/off other devices. You can set one or more conditions, when temperature, humidity, light, noise, air quality lower or larger than the preset level, it will trigger to turn on/off the triggered device(such as Sonoff).

screenshot_2016-11-24-14-54-08-943_com-coolkit

Go to the device list, tap on the up upper right corner,  then tap on “Scene”. Click “+” to add a scene. Input a name for the new scene, and add trigger condition. Select the Sonoff SC and save. Next, enter the triggered device’s action: ON or OFF, save it. Last, save your scene.

screenshot_2016-11-24-14-53-05-412_com-coolkit

5. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

6. Security mechanism

One device one owner. Other people can not add the devices that have already been added.

7. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

8. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can not find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please restart your device.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to hotspot. All devices must be connected to the router, thus they can communicate with the Internet via the cloud server.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

Sonoff Dimming LED

Hi, welcome to use Sonoff Dimming LED! The LED supports to adjust 3 light color: cold, medium and warm, and supports to adjust the brightness from 1% to 100%. Power Supply: 180-265V AC. Power: 30-42W.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Wiring instruction

There are “in” and “out” marks on the device, you must connect the driver output cable to LED bar with—>mark. Please connect the LED bars with the Grove wires. Connect the Grove wire with the LED bar W/G/Y will connect to White/Gray/Yellow wire. There are direction arrows on each bar, make sure you connect the wires correctly. Please don’t mistake the direction, or it will not work.

led_connection_1

sonoff_led_connection

3. Add device

1. Power up your device, let it on.

2. Turn off and then turn on your power switch repeatedly for 3 times until LED turn into breathing state. The interval can’t be too long or too short.

add_device

3. For Android, please select the 1st icon, click next.

For iOS, you will see two pairing method icons to select, if your app version is 2.4.0 or higher, please select the 1st icon, if your app version is lower than 2.4.0, please select the 2nd icon, then click next.

The App will auto-search the device.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, the device will be registered by eWelink and add it to your account,it takes 1-3 minutes.

6. Name the device to complete.

7. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

3. APP features

1. Remote ON/OFF

Turn on/off by tapping on device icon. Device state will simultaneously display on the interface.

2. Adjust mode

Tap mode to switch among the 3 modes: cold, medium and warm.

3. Adjust brightness

You can adjust the brightness from 1%-100%.

4. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

5. Timing

定时

Support max 8  single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

6. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off Sonoff the product.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

Sonoff Pow

Hi, welcome to use Sonoff Pow! Sonoff Pow supports to monitor connected device’s real-time power, measure power usage for a specified period and check daily/monthly power usage.  It supports 90~ 250V AC input,  the max. current is 16A, the max. power is 3500W.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Wiring instruction

sonoff-pow-06

3. Add device

1. Power up your device.

sonoff-pow-pairing

2. Press the button for 7 seconds until the green LED blinks like this: blinks 3 times and on repeatedly.

add_device

3. Please click the “Add” icon on eWeLink to search device.

For Android, please select the 1st icon, click next.

For iOS, you will see two pairing method icons to select. If your app version is 2.4.0 or higher, please select the 1st icon; If your app version is lower than 2.4.0, please select the 2nd icon, then click next.

The App will auto-search the device.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, the device will be registered by eWelink and add it to your account,it takes 1-3 minutes.

6. Name the device to complete.

7. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

3. APP features

1. Remote ON/OFF

Turn on/off by tapping on device icon. Device state and real-time power will simultaneously display on the interface.

sonoff_pow_01

2. Tap 1 to measure device’s power usage for a period of time. Tap “start” to count the power usage, and tap “stop” to stop counting.

3. Tap 2 to check daily and monthly power usage.

4. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

5. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

6. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off Sonoff Pow.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

7. Security mechanism

One device one owner. Other people can not add the devices that have already been added.

8. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum.

If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router,  only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which mean the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to a hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

智能触摸墙壁开关使用说明

您好,欢迎使用智能触摸墙壁开关!

一、下载“易微联”手机APP

请直接扫描二维码下载,或者

1. 安卓手机在各大应用市场或者百度搜索“易微联”下载APP。

2. 苹果手机在app store搜索 “eWeLink” 安装APP。
二、墙壁开关Sonoff Touch安装示意图

Sonoff-Touchwd

1. 零火线墙壁开关必须要有零火线供电,不能直接替换单火线传统开关。注意零火线不能接反!

三、添加设备流程

1. 安装好后给开关通电。

Touch_pairing

touc

touc

touc2

2. 长按第一个按钮7秒左右,松开。

 

3. 在APP点击搜索设备图标。

安卓用户,请选第一个图标。点击下一步。

苹果用户,V2.4.0及以上版本,请选第二个图标。V2.4.0以下版本,请选第一个图标。点击下一步。

4. 搜索到设备后提示您输入您自家的wifi名和密码。

4.1 如您家里的WiFi不需要密码则留空不填即可。

4.2 设备使用的是2.4G wifi通信协议,暂不支持5G无线路由器。

 

5. 输入密码后,下一步给设备命名,即可成功添加设备。

6. 此时设备如果显示不在线,请稍等两分钟,设备正在尝试通过您的无线路由器连接到云端服务器。app显示设备成功连线后,就可以远程开关了。如果app还是显示设备离线,请关闭重新进入app。

 

四、app功能和特性

1. 远程开关功能和开关状态同步反馈

在app操作界面,单次点击APP开关图标即可实现开关灯,即使手动触摸控制开关,app也会实时显示灯具当前的开关状态。

2. 主账号分享设备给他人功能

分享

主账户(第一个添加了该设备的账户)可把设备分享给好友,实现多人共同控制。被分享账号必须是已注册的易微联账号,被分享时请保持登录在线状态。分享的同时可以勾选定时器权限(新增、修改、删除、启用)。

3. 多种模式定时及断网执行功能

定时

设备支持多达8组定时开关,有单次、重复以及延时快速定时等模式。设备可以在断网情况下依旧执行设置好的定时开关,但需要保持设备不断电。

4. 场景

您可以设置普通场景或者智能场景。普通场景让您一键全开或者一键全关场景内的设备。智能场景利用其他温湿度设备作为触发条件,当条件满足时,设备会被联动触发开动或者关闭。

请到设备列表,点击右上角的场景,添加场景名称、执行条件(点击执行/联动条件设备)、执行打开或者关闭。要执行普通场景时,请点击“执行”。

5. 设备安全机制

设备只能被添加在一个账户下(主账户),其他账户无法添加该设备,需要主账户删除该设备或分享。

6. APP语言切换

APP会自动识别用户手机系统语言并显示对应的语言版本。您也可以在用户中心手动切换语言。

五、常见问题和解决办法

1. 添加成功后,设备为什么显示不在线,无法控制?

答:设备刚添加成功后,需要一两分钟时间连接您的路由器并联网。如果长时间还是显示不在线,请把开关面板拿掉,可能是信号被挡住了。

如果还连不上根据开关绿色(或蓝色)指示灯的状态来判断:

① 绿灯(或蓝色)快闪一下灭2秒,说明没有成功连接到您的路由器,可能是您的WiFi名有中文或者密码输错或者设备离您的路由器太远,信号太弱,也有可能环境有干扰。请将设备靠近路由器或者删除设备重新添加一遍;另外设备不能识别5G路由器,请使用2.4G的wifi无线路由器。最后请确认您的路由器后台没有使用MAC地址过滤。

② 绿灯(或蓝色)亮1秒灭1秒,说明设备连接到了路由器和服务器,但是没有被正确添加到用户账户下,请给设备断电再上电,稍等片刻,如果情况依旧,请删除设备重新添加;

③ 绿灯(或蓝色)快闪两下灭2秒,说明设备已连接到了路由器但没有连接到服务器,请确认您的路由器能正常上
网。

2. 搜索添加设备超时,多次尝试都无法添加成功,怎么办?

答:可能是频繁添加造成手机缓存没有足够的时间刷新。请先关闭手机wlan功能,过一会再开启手机wlan功能,最好同时给设备断电重启,再尝试添加。

3. 可以用局域网控制吗?可以直接连接设备热点控制吗?

答:安卓版本支持局域网控制,但是苹果版本目前还不支持。您家里的wifi必须要能正常上网。

4. 设备指示灯不亮了?上电没反应?按开关按钮继电器不工作?

答:可能是电路损坏,请寄回给我们检测。如果是用户自行拆卸(撕毁保修标签),导致人为损坏,需自行承担来回运费并支付一定的物料费,如果是用户擅自修改或重烧固件,导致设备固件丢失,一经发现,我们不提供任何售后服务,用户需自行承担所有损失和费用。

如果以上无法解决您的问题,请在APP上提交一个反馈。如有任何质量问题,请联系卖家,感谢您对Sonoff的支持!

IFAN智能风扇使用说明

您好,欢迎使用IFAN智能风扇!

一、下载“易微联”手机APP

请直接扫描二维码下载,或者

1. 安卓手机在各大应用市场或者百度搜索“易微联”下载APP。

2. 苹果手机在app store搜索 “eWeLink” 安装APP。

 

二、添加风扇流程

1. 插入插座,给风扇通电。

ifan

2. 长按开/风速按钮7秒,WiFi指示灯状态会变成快闪三下,常亮,再闪三下,常亮…..循环交替,松开。此时风扇处于等待被添加状态。

 

3. 在APP点击搜索设备图标。

安卓用户,请选第一个图标。点击下一步。

苹果用户,V2.4.0及以上版本,请选第一个图标。V2.4.0以下版本,请选第二个图标。点击下一步。

4. 搜索到设备后提示您输入您自家的wifi名和密码。

4.1 如您家里的WiFi不需要密码则留空不填即可。

4.2 设备使用的是2.4G wifi通信协议,暂不支持5G无线路由器。

 

5. 输入密码后,下一步给设备命名,即可成功添加设备。

6. 此时设备如果显示不在线,请稍等两分钟,设备正在尝试通过您的无线路由器连接到云端服务器。当WiFi指示灯变成长亮时,说明设备成功连线,可以远程操控了。如果app还是显示设备离线,请关闭重新进入app。

三、app功能和特性

1. 远程开关功能和开关状态同步反馈

在app操作界面,单次点击APP操作图标即可实现相关操作。如果手动控制风扇,app也会实时显示设备当前运行状态。

2. 主账号分享设备给他人功能

分享

主账户(第一个添加了该设备的账户)可把设备分享给好友,实现多人共同控制。被分享账号必须是已注册的易微联账号,被分享时请保持登录在线状态。分享的同时可以勾选定时器权限(新增、修改、删除、启用)。

3. 多种模式定时及断网执行功能

定时

设备支持多达8组定时开关,有单次、重复以及延时快速定时等模式。设备可以在断网情况下依旧执行设置好的定时开关,但需要保持设备不断电。

4. 场景

您可以设置普通场景或者智能场景。普通场景让您一键全开或者一键全关场景内的设备。智能场景利用其他温湿度设备作为触发条件,当条件满足时,设备会被联动触发开动或者关闭。

请到设备列表,点击右上角的场景,添加场景名称、执行条件(点击执行/联动条件设备)、执行打开或者关闭。要执行普通场景时,请点击“执行”。

5. 设备安全机制

设备只能被添加在一个账户下(主账户),其他账户无法添加该设备,需要主账户删除该设备或分享。

6. APP多语言切换

APP会自动识别用户手机系统语言并显示对应的语言版本。您也可以在用户中心手动切换语言。

四、常见问题和解决方法

1. 添加成功后,设备为什么显示不在线,无法控制?

答:设备刚添加成功后,需要一两分钟时间连接您的路由器并联网。如果长时间还是显示不在线,请根据风扇的wifi指示灯的状态来判断:

① wifi指示灯快闪一下灭2秒,说明没有成功连接到您的路由器,可能是您的WiFi名有中文或者密码输错或者设备离您的路由器太远,信号太弱,也有可能环境有干扰。请将设备靠近路由器或者删除设备重新添加一遍;另外设备不能识别5G路由器,请使用2.4G的wifi无线路由器。最后请确认您的路由器后台没有使用MAC地址过滤。

② wifi指示灯亮1秒灭1秒,说明风扇已经连接到了路由器和服务器,但是没有被正确添加到用户账户下,请拔掉风扇插头再插上,稍等2分钟,如果情况依旧,请删除设备重新添加;

③ wifi指示灯快闪两下灭2秒,说明设备已连接到了路由器但没有连接到服务器,请确认您的路由器能正常上网。

2. 搜索添加设备超时,多次尝试都无法添加成功,怎么办?

答:可能是频繁添加造成手机缓存没有足够的时间刷新。请先关闭手机wlan功能,过一会再开启手机wlan功能,最好同时给设备断电重启,再尝试添加。

3. 可以用局域网控制吗?可以直接连接设备热点控制吗?

答:该产品暂时不支持局域网控制,您家里的wifi必须要能正常上网。

4. 风扇wifi指示灯不亮了?上电没反应?按开关按钮风扇不工作?

答:可能是电路损坏,请寄回给我们检测。如果是用户自行拆卸(撕毁保修标签),导致人为损坏,需自行承担来回运费并支付一定的物料费。如果是用户擅自修改或重烧固件,导致设备固件丢失,一经发现,我们不提供任何售后服务,用户需自行承担所有损失和费用。

如果以上无法解决您的问题,请在APP上提交一个反馈。如有任何质量问题,请联系卖家,感谢您对Sonoff的支持!

SONOFF SV

Hi, welcome to use Sonoff SV! Sonoff SV is a low power supply Sonoff version, which supports 5-24V input.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Schematic diagram of equipment installation.

In default mode, it can be powered up with 5V-24V DC, or 5V DC.

You may change the device to isolated mode, two resistors must be removed first.

Sonoff_SV_mode

3. Add Device

1. Power up the device.

sv

2. Press the button for 7 seconds until the green LED blinks like below:

It’s a 1st generation device, when enter pairing status the LED blinks 1 time and repeats. Go to eWeLink, click “+”.

add_device

For Android, please select the 1st icon, click next.

For iOS, please go to  Phone Setting>WiFi>connect the WiFi begins with ITEAD-******, enter default password 12345678. Go back to eWeLink, select the 2nd icon if your version is 2.4.0 or higher, select the 1st icon if your version is lower than 2.4.0. Click next.

3. It will auto-search and connect smart home device.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, eWelink register and add it to your account,it takes 1-3 minutes. When this complete, you can give your device a name.

6. Name the device to complete.

Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

 

4. APP Features

1. WiFi remote control and device state

Turn on/off by tapping on device icon. Device state always simultaneous display on APP.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the Sonoff SV.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

5. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

6. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

5. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: the Sonoff SV supports to be controlled by LAN.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

SONOFF TH10/ TH16

Hi, welcome to use TH10/ TH16! Sonoff TH10/TH16 can monitor real-time temperature and humidity through eWeLink. There are two power supply specifications: 10A or 16A. It supports presetting a temperature or humidity range to auto-turn on/off connected device. It also supports Smart Scene.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Wiring instruction

There are two devices to choose from:10A or 16A.

3. Add device

1. Plug your sensor into the jack, power up your device.

2. Press the button for 7 seconds until the green LED blinks like this: blinks 3 times and on repeatedly.

3. Please click the “Add” icon on eWeLink to search device.

add_device

For Android, please select the 1st icon, click next.

For iOS, you will see two pairing method icons to select. If your app version is 2.4.0 or higher, please select the 1st icon; If your app version is lower than 2.4.0, please select the 2nd icon, then click next.

The App will auto-search the device.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, the device will be registered by eWelink and added it to your account. It takes 1-3 minutes.

6. Name the device to complete.

7. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”. If eWeLink shows still “Offline”, please restart eWeLink.

 

3. APP features

1. WiFi remote control and device state, temperature and humidity checking.

Turn on/off by tapping on device icon. If you use the Sonoff TH with temperature and humidity sensor, device state and real-time temperature and humidity values will simultaneously display on the interface.

In Auto mode, you can set a specified temperature or humidity range to turn on/off connected device. In Manual mode, you can tap on the device icon to turn on/off.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

5. Auto mode and Manual mode

5.1 In Auto mode, the switch can not be turned ON/OFF by the button manually.

5.2 In Manual mode, the switch can be turned ON/OFF at any time.

5.3 The preset timers can work as usual in Auto mode.

6. Insert sensor to start device or not.

6.1 Insert sensor: APP will display temperature and humidity values, and it can be set to Auto mode.

6.2 Without sensor: APP will not display temperature and humidity value, and it does not have Auto mode.

7. Smart Scene

You can use Sonoff TH to collect temperature value and set a temperature to turn on/off several types of other switches (such as Sonoff, Sonoff RF). Note: the Sonoff TH should in manual mode, not auto mode. When the real-time temperature is across the preset temperature range, it will trigger the condition.

400px-ewelink_sonoff_th_smart_scene

8. Update

It will auto-remind you of new firmware or version. Please update as soon as you can so that you can use the latest features.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has been added successfully but stays “Offline”.

Answers: The newly added device needs 1-2 min to connect to your router and the Internet. However, if it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats: It means the device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is compatible. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Pressed the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and so the buyer should bear extra repair cost.