Sonoff Pow

Hi, welcome to use Sonoff Pow! Sonoff Pow supports to monitor connected device’s real-time power, measure power usage for a specified period and check daily/monthly power usage.  It supports 90~ 250V AC input,  the max. current is 16A, the max. power is 3500W.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Wiring instruction

sonoff-pow-06

3. Add device

1. Power up your device.

sonoff-pow-pairing

2. Press the button for 7 seconds until the green LED blinks like this: blinks 3 times and on repeatedly.

add_device

3. Please click the “Add” icon on eWeLink to search device.

For Android, please select the 1st icon, click next.

For iOS, you will see two pairing method icons to select. Please select the corresponding icon, then click next.

The App will auto-search the device.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, the device will be registered by eWelink and add it to your account,it takes 1-3 minutes.

6. Name the device to complete.

7. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

3. APP features

1. Remote ON/OFF

Turn on/off by tapping on device icon. Device state and real-time power will simultaneously display on the interface.

sonoff_pow_01

2. Tap 1 to measure device’s power usage for a period of time. Tap “start” to count the power usage, and tap “stop” to stop counting.

3. Tap 2 to check daily and monthly power usage.

4. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

5. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

6. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off Sonoff Pow.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

7. Security mechanism

One device one owner. Other people can not add the devices that have already been added.

8. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum.

If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router,  only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which mean the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to a hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

智能触摸墙壁开关使用说明

您好,欢迎使用智能触摸墙壁开关!

一、下载“易微联”手机APP

请直接扫描二维码下载,或者

1. 安卓手机在各大应用市场或者百度搜索“易微联”下载APP。

2. 苹果手机在app store搜索 “eWeLink” 安装APP。
二、墙壁开关Sonoff Touch安装示意图

Sonoff-Touchwd

1. 零火线墙壁开关必须要有零火线供电,不能直接替换单火线传统开关。注意零火线不能接反!

三、添加设备流程

1. 安装好后给开关通电。

Touch_pairing

touc

touc

touc2

2. 长按第一个按钮7秒左右让LED指示灯快闪,松开。

 

3. 在APP点击搜索设备图标。

安卓用户,请选第一个图标。点击下一步。

苹果用户,请根据指示灯选择配对图标。点击下一步。

4. 搜索到设备后提示您输入您自家的wifi名和密码。

4.1 如您家里的WiFi不需要密码则留空不填即可。

4.2 设备使用的是2.4G wifi通信协议,暂不支持5G无线路由器。

 

5. 输入密码后,下一步给设备命名,即可成功添加设备。

6. 此时设备如果显示不在线,请稍等两分钟,设备正在尝试通过您的无线路由器连接到云端服务器。app显示设备成功连线后,就可以远程开关了。如果app还是显示设备离线,请关闭重新进入app。

 

四、app功能和特性

1. 远程开关功能和开关状态同步反馈

在app操作界面,单次点击APP开关图标即可实现开关灯,即使手动触摸控制开关,app也会实时显示灯具当前的开关状态。

2. 主账号分享设备给他人功能

分享

主账户(第一个添加了该设备的账户)可把设备分享给好友,实现多人共同控制。被分享账号必须是已注册的易微联账号,被分享时请保持登录在线状态。分享的同时可以勾选定时器权限(新增、修改、删除、启用)。

3. 多种模式定时及断网执行功能

定时

设备支持多达8组定时开关,有单次、重复以及延时快速定时等模式。设备可以在断网情况下依旧执行设置好的定时开关,但需要保持设备不断电。

4. 场景

您可以设置普通场景或者智能场景。普通场景让您一键全开或者一键全关场景内的设备。智能场景利用其他温湿度设备作为触发条件,当条件满足时,设备会被联动触发开动或者关闭。

请到设备列表,点击右上角的场景,添加场景名称、执行条件(点击执行/联动条件设备)、执行打开或者关闭。要执行普通场景时,请点击“执行”。

5. 设备安全机制

设备只能被添加在一个账户下(主账户),其他账户无法添加该设备,需要主账户删除该设备或分享。

6. APP语言切换

APP会自动识别用户手机系统语言并显示对应的语言版本。您也可以在用户中心手动切换语言。

五、常见问题和解决办法

1. 添加成功后,设备为什么显示不在线,无法控制?

答:设备刚添加成功后,需要一两分钟时间连接您的路由器并联网。如果长时间还是显示不在线,请把开关面板拿掉,可能是信号被挡住了。

如果还连不上根据开关绿色(或蓝色)指示灯的状态来判断:

① 绿灯(或蓝色)快闪一下灭2秒,说明没有成功连接到您的路由器,可能是您的WiFi名有中文或者密码输错或者设备离您的路由器太远,信号太弱,也有可能环境有干扰。请将设备靠近路由器或者删除设备重新添加一遍;另外设备不能识别5G路由器,请使用2.4G的wifi无线路由器。最后请确认您的路由器后台没有使用MAC地址过滤。

② 绿灯(或蓝色)亮1秒灭1秒,说明设备连接到了路由器和服务器,但是没有被正确添加到用户账户下,请给设备断电再上电,稍等片刻,如果情况依旧,请删除设备重新添加;

③ 绿灯(或蓝色)快闪两下灭2秒,说明设备已连接到了路由器但没有连接到服务器,请确认您的路由器能正常上
网。

2. 搜索添加设备超时,多次尝试都无法添加成功,怎么办?

答:可能是频繁添加造成手机缓存没有足够的时间刷新。请先关闭手机wlan功能,过一会再开启手机wlan功能,最好同时给设备断电重启,再尝试添加。

3. 可以用局域网控制吗?可以直接连接设备热点控制吗?

答:安卓版本支持局域网控制,但是苹果版本目前还不支持。您家里的wifi必须要能正常上网。

4. 设备指示灯不亮了?上电没反应?按开关按钮继电器不工作?

答:可能是电路损坏,请寄回给我们检测。如果是用户自行拆卸(撕毁保修标签),导致人为损坏,需自行承担来回运费并支付一定的物料费,如果是用户擅自修改或重烧固件,导致设备固件丢失,一经发现,我们不提供任何售后服务,用户需自行承担所有损失和费用。

如果以上无法解决您的问题,请在APP上提交一个反馈。如有任何质量问题,请联系卖家,感谢您对Sonoff的支持!

IFAN智能风扇使用说明

您好,欢迎使用IFAN智能风扇!

一、下载“易微联”手机APP

请直接扫描二维码下载,或者

1. 安卓手机在各大应用市场或者百度搜索“易微联”下载APP。

2. 苹果手机在app store搜索 “eWeLink” 安装APP。

 

二、添加风扇流程

1. 插入插座,给风扇通电。

ifan

2. 长按开/风速按钮7秒,WiFi指示灯状态会变成快闪三下,常亮,再闪三下,常亮…..循环交替,松开。此时风扇处于等待被添加状态。

 

3. 在APP点击搜索设备图标。

安卓用户,请选第一个图标。点击下一步。

苹果用户,请根据闪烁方式选择图标。点击下一步。

4. 搜索到设备后提示您输入您自家的wifi名和密码。

4.1 如您家里的WiFi不需要密码则留空不填即可。

4.2 设备使用的是2.4G wifi通信协议,暂不支持5G无线路由器。

 

5. 输入密码后,下一步给设备命名,即可成功添加设备。

6. 此时设备如果显示不在线,请稍等两分钟,设备正在尝试通过您的无线路由器连接到云端服务器。当WiFi指示灯变成长亮时,说明设备成功连线,可以远程操控了。如果app还是显示设备离线,请关闭重新进入app。

三、app功能和特性

1. 远程开关功能和开关状态同步反馈

在app操作界面,单次点击APP操作图标即可实现相关操作。如果手动控制风扇,app也会实时显示设备当前运行状态。

2. 主账号分享设备给他人功能

分享

主账户(第一个添加了该设备的账户)可把设备分享给好友,实现多人共同控制。被分享账号必须是已注册的易微联账号,被分享时请保持登录在线状态。分享的同时可以勾选定时器权限(新增、修改、删除、启用)。

3. 多种模式定时及断网执行功能

定时

设备支持多达8组定时开关,有单次、重复以及延时快速定时等模式。设备可以在断网情况下依旧执行设置好的定时开关,但需要保持设备不断电。

4. 场景

您可以设置普通场景或者智能场景。普通场景让您一键全开或者一键全关场景内的设备。智能场景利用其他温湿度设备作为触发条件,当条件满足时,设备会被联动触发开动或者关闭。

请到设备列表,点击右上角的场景,添加场景名称、执行条件(点击执行/联动条件设备)、执行打开或者关闭。要执行普通场景时,请点击“执行”。

5. 设备安全机制

设备只能被添加在一个账户下(主账户),其他账户无法添加该设备,需要主账户删除该设备或分享。

6. APP多语言切换

APP会自动识别用户手机系统语言并显示对应的语言版本。您也可以在用户中心手动切换语言。

四、常见问题和解决方法

1. 添加成功后,设备为什么显示不在线,无法控制?

答:设备刚添加成功后,需要一两分钟时间连接您的路由器并联网。如果长时间还是显示不在线,请根据风扇的wifi指示灯的状态来判断:

① wifi指示灯快闪一下灭2秒,说明没有成功连接到您的路由器,可能是您的WiFi名有中文或者密码输错或者设备离您的路由器太远,信号太弱,也有可能环境有干扰。请将设备靠近路由器或者删除设备重新添加一遍;另外设备不能识别5G路由器,请使用2.4G的wifi无线路由器。最后请确认您的路由器后台没有使用MAC地址过滤。

② wifi指示灯亮1秒灭1秒,说明风扇已经连接到了路由器和服务器,但是没有被正确添加到用户账户下,请拔掉风扇插头再插上,稍等2分钟,如果情况依旧,请删除设备重新添加;

③ wifi指示灯快闪两下灭2秒,说明设备已连接到了路由器但没有连接到服务器,请确认您的路由器能正常上网。

2. 搜索添加设备超时,多次尝试都无法添加成功,怎么办?

答:可能是频繁添加造成手机缓存没有足够的时间刷新。请先关闭手机wlan功能,过一会再开启手机wlan功能,最好同时给设备断电重启,再尝试添加。

3. 可以用局域网控制吗?可以直接连接设备热点控制吗?

答:该产品暂时不支持局域网控制,您家里的wifi必须要能正常上网。

4. 风扇wifi指示灯不亮了?上电没反应?按开关按钮风扇不工作?

答:可能是电路损坏,请寄回给我们检测。如果是用户自行拆卸(撕毁保修标签),导致人为损坏,需自行承担来回运费并支付一定的物料费。如果是用户擅自修改或重烧固件,导致设备固件丢失,一经发现,我们不提供任何售后服务,用户需自行承担所有损失和费用。

如果以上无法解决您的问题,请在APP上提交一个反馈。如有任何质量问题,请联系卖家,感谢您对Sonoff的支持!

SONOFF SV

Hi, welcome to use Sonoff SV! Sonoff SV is a low power supply Sonoff version, which supports 5-24V input.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Schematic diagram of equipment installation.

In default mode, it can be powered up with 5V-24V DC, or 5V DC.

You may change the device to isolated mode, two resistors must be removed first.

Sonoff_SV_mode

3. Add Device

1. Power up the device.

sv

2. Press the button for 7 seconds until the green LED blinks like this: blinks 1 time and repeats.

Go to eWeLink, click “+”.

add_device

For Android, please select the 1st icon, click next.

For iOS, select the corresponding icon. Then go to  Phone Setting>WiFi>connect the WiFi begins with ITEAD-******, enter default password 12345678. Go back to eWeLink, click next.

3. It will auto-search and connect smart home device.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, eWelink register and add it to your account,it takes 1-3 minutes. When this complete, you can give your device a name.

6. Name the device to complete.

Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

 

4. APP Features

1. WiFi remote control and device state

Turn on/off by tapping on device icon. Device state always simultaneous display on APP.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the Sonoff SV.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

5. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

6. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

5. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: the Sonoff SV supports to be controlled by LAN.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

SONOFF TH10/ TH16

Hi, welcome to use TH10/ TH16! Sonoff TH10/TH16 can monitor real-time temperature and humidity through eWeLink. There are two power supply specifications: 10A or 16A. It supports presetting a temperature or humidity range to auto-turn on/off connected device. It also supports Smart Scene.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Wiring instruction

There are two devices to choose from:10A or 16A.

3. Add device

1. Plug your sensor into the jack, power up your device.

2. Press the button for 7 seconds until the green LED blinks like this: blinks 3 times and on repeatedly.

3. Please click the “Add” icon on eWeLink to search device.

add_device

For Android, please select the 1st icon, click next.

For iOS, you will see two pairing method icons to select. Please select the corresponding icon, then click next.

The App will auto-search the device.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, the device will be registered by eWelink and added it to your account. It takes 1-3 minutes.

6. Name the device to complete.

7. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”. If eWeLink shows still “Offline”, please restart eWeLink.

 

3. APP features

1. WiFi remote control and device state, temperature and humidity checking.

Turn on/off by tapping on device icon. If you use the Sonoff TH with temperature and humidity sensor, device state and real-time temperature and humidity values will simultaneously display on the interface.

In Auto mode, you can set a specified temperature or humidity range to turn on/off connected device. In Manual mode, you can tap on the device icon to turn on/off.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

5. Auto mode and Manual mode

5.1 In Auto mode, the switch can not be turned ON/OFF by the button manually.

5.2 In Manual mode, the switch can be turned ON/OFF at any time.

5.3 The preset timers can work as usual in Auto mode.

6. Insert sensor to start device or not.

6.1 Insert sensor: APP will display temperature and humidity values, and it can be set to Auto mode.

6.2 Without sensor: APP will not display temperature and humidity value, and it does not have Auto mode.

7. Smart Scene

You can use Sonoff TH to collect temperature value and set a temperature to turn on/off several types of other switches (such as Sonoff, Sonoff RF). Note: the Sonoff TH should in manual mode, not auto mode. When the real-time temperature is across the preset temperature range, it will trigger the condition.

400px-ewelink_sonoff_th_smart_scene

8. Update

It will auto-remind you of new firmware or version. Please update as soon as you can so that you can use the latest features.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has been added successfully but stays “Offline”.

Answers: The newly added device needs 1-2 min to connect to your router and the Internet. However, if it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats: It means the device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is compatible. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Pressed the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and so the buyer should bear extra repair cost.

SONOFF DUAL USER GUIDE

Hi, welcome to use Sonoff Dual! Sonoff Dual supports to connect two home appliances and electronic devices, allowing you to independently control them on eWeLink.

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Follow below wiring instruction to connect the device.

Sonoff_Dual_Wiring_instruction

3. Add device

1. Power up the device after you complete the installation.

dual

2. Press the pairing button for 7 seconds until the green LED blinks like below: the LED blinks 3 times and on repeatedly.

For Android, please select the 1st icon, click next.

For iOS, you will see two pairing method icons to select. Please select the corresponding icon, then click next.

3. It will auto-search and connect smart home device around you.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

5. Name the device to complete.

Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

 

3. APP features

1. WiFi remote control and device state

Turn on/off by tapping on device icons. If you have connected two devices, then you can tap on the corresponding device icon to turn on/off. Device state always simultaneously display on APP.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the device.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

5. Set default device state

设置

Go to the Device Setting, you can set default device state to be on, off or keep when the device is powered on.

6. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

7. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

Note: this model doesn’t support desktop widget on Android phone.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router,  only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which mean the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to a hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

S21 TH SMART SOCKET

Hi,  welcome to use S21 Smart Socket!

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

 

2. Add device

1. Plug in and power up your S21 Socket.

s21pd

2. Press the button for 7 seconds until the green LED blinks like this: 

add_device

3. Click the “Add” icon on eWeLink.

For Android users, please select the first pairing method icon, click next.

For iOS users, please select the corresponding icon.  Click next.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. NEXT, eWelink will search the device and add it to your account,it takes 1-3 minutes.

6. Name the device to complete.

Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink still shows “Offline”, please restart eWeLink.

 

3. APP features

1. WiFi remote control and device state and TH checking.

Turn on/off by tapping on device icon. Device state always simultaneous display on APP.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the device.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

 

5. Auto mode and Manual mode

5.1 In the Auto mode, the socket can not be turned ON/OFF by the button manually.

5.2 In Manual mode, the switch can be ON/OFF at any time.

5.3 The preset timers can work as usual in Auto mode.

6. Insert sensor to S21 or not.

6.1 Insert sensor: APP will display temperature and humidity value, and it can be set to Auto mode.

6.2 Without sensor: APP will not display temperature and humidity value, and it does not have Auto mode.

6.Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

7. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router,  only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which mean the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to a hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

INCHING/SELF-LOCKING Switch

Hi, welcome to use 1 channel Inching/Self-locking Switch 5V 12V!

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Schematic diagram of equipment.

The switch has two input voltage supply specifications: 5V and 5V/12V. No matter which specification is selected, the functions remain the same.

5V self-lock/inching mode wireless switch:self-locking-inching-wireless-switch-5V-2

5V/12V self-lock/inching mode wireless switch:Self-lockIing-Inching-Mode-Wireless-Switch-5V12V-1

There are two working modes for the product: inching mode and self-locking mode. Users can press the self-lock/inching mode button to switch between these two modes.

When the module is switched to self-locking mode, users can turn on/off the connected appliance immediately.. There are two wiring way.

Self-lockIing-Inching-Mode-Wireless-Switch-5V-self-locking-1

self-locking-inching-wireless-switch-5V-self-locking-2

In inching mode, users can have two wiring ways to select:

  • Turn on 1s and then auto-off
  • Turn off 1s and then auto-on.

When the module is switched to inching mode, users can press on/off toggle button to turn on or off connected device. There are two kinds of wiring way.

self-locking-inching-wireless-switch-5V-inching1

The first wiring way is to connect COM and NO with an appliance. In this way, when users press the setting button or use the APP to turn on, connected appliance will be turned on for 1s and then auto turned off.

self-locking-inching-wireless-switch-5V-inching2

The second wiring way is to connect NC and COM with an appliance. In this way, when users press the setting button or use the APP to turn off, connected appliance will be turned off for 1s and then auto turned on.

LED Indicator:

There are 3 LEDs, the LED beside self-lock/inching mode button indicates the working mode(on: self-locking mode, off: inching mode).

The LED beside on/off setting button indicates WIFI status(enter pairing status: long press the setting button until LED blinks fast).

And the one below the relay indicates relay on or off status(on: turn on connected device, off: turn off connected device).

3. Add device

1.Power up the device with 5V DC or 12V DC.

dd

2. Press the above button for 7 seconds until the red LED fast blinks. For the new version, it blinks like this: . For the old version, it blinks like this: .

For Android users, please select the first pairing method icon, click next.

For iOS users, if they are using the new version, please select the corresponding icon. Click next.

If they are using the old version, select the pairing icon accordingly. Then go to  Phone Setting>WiFi>connect the WiFi begins with ITEAD-******, enter default password 12345678. Go back to eWeLink, click next.

add_device

3. It will auto-search and connect smart home device around you.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. Next, eWelink will search the device and add it to your account,it takes 1-3 minutes. When this complete, you can give your device a name.

6. Name the device to complete.

Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect with your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

 

4. APP features

1. WiFi remote control and device state

Turn on/off by tapping on device icon. Device state always simultaneous display on APP.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the device.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

5. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

6.Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

5. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum.

If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router,  only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which mean the device has connected to router and server but failed to be added to device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in paring status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: The Sonoff SV supports to be controlled by LAN.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

TOWER SOCKET USER GUIDE

Hi, welcome to use Sonoff Tower!

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

2. Add device

dierc

1.Power up your Sonoff Tower, press and hold the big button on 2nd floor until the WiFi indicator LED fast blinks.

3d

2. Press the black button for 7 seconds until the green LED blinks like this: 

2.2 For Android, please select the 1st icon, click next.

For iOS, please go to  Phone Setting>WiFi>connect the WiFi begins with ITEAD-******, enter default password 12345678. Go back to eWeLink, select the corresponding icon. Click next.

3. It will auto-search and connect smart home device around you.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

5. Name the device to complete.

6. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

 

3. APP Features

1. WiFi remote control and device state

Turn on/off by tapping on device icon. Device state always simultaneous display on APP.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the device.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

5. Set default device state

设置

Set default device state to be on or off when the device is powered on.

6. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

7. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router,  only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which mean the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to a hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.

IFAN USER GUIDE

Hi, welcome to use Smart iFAN!

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iOS version or Google play for Android version.

 

2. Add device

1. Plug in and power up your iFAN.

ifan

2. Press the On/Speed button for 7 seconds until the WiFi LED blinks like this: blinks 3 times and on repeatedly.

Go to eWeLink, click “+”.

add_device

For Android users, please select the 1st icon, click next.

For iOS users, please select the corresponding icon, then click next.

3. It will auto-search and connect smart home device around you.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-WiFi is not supported.

souse

5. NEXT, eWelink will search the device and add it to your account,it takes 1-3 minutes.

6. Name the device to complete.

7. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

 

3. APP features

1. WiFi remote control and device state

Turn on/off by tapping on device icon. Device state always simultaneous display on APP.

2. Share Control

分享

The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. The other user will have access to control the device.

3. Timing

定时

Support max 8 enabled single/repeat/countdown timing schedules each device. Preset timers can work even network is unavailable, but the device must keep power on.

4. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the device.

Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

5. Security mechanism

One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first.

6. Update

It will auto-remind you of new firmware or version. Please update as soon as you can.

4. Problems and solutions

Read the detailed FAQ  on Itead Smart Home Forum. If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device has connected to router and server but failed to be added to the device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN? Can my phone be directly connected to device hotspot?

Answers: Currently this product does not support LAN or directly connect to a hotspot. It must connect to the WiFi router.

4. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, please send it back for testing. Return shipping postage and packaging will be at buyer’s expense, if the device is damaged by the buyer, and the buyer should bear extra repair cost.